ASROCK P4I945GC, Руководство пользователя

Страница: 27 / 40

2 7 2 7 2 7 2 7 2 7
3.4.2 3.4.2 3.4.2 3.4.2 3.4.2 Chipset Configuration Chipset Configuration Chipset Configuration Chipset Configuration Chipset Configuration
BIOS SETUP UTILITY
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Chipset Configuration
DRAM Frequency
Flexibility Option
DRAM CAS# Latency
DRAM RAS# to CAS# Delay
DRAM
DRAM
RAS# Precharge
RAS# Activate to Precha
[Disabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
F9 Load Defaults
Options
200MHz (DDRII400)
Auto
266MHz (DDRII533)
333MHz (DDRII667)
Advanced
[PCI]
[Auto]
[DVMT Mode]
[Maximum DVMT]
Primary Graphics Adapter
Internal Graphics Mode Select
DVMT Mode Select
DVMT/FIXED Memory
[Auto]
[Auto]
[Enabled]
Onboard HD Audio
Front Panel
CD-In
[Auto]
Advanced DRAM Configuration
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [200MHz (DDRII 400)], [266MHz
(DDRII 533)], [333MHz (DDRII 667)]. The configuration options may change
according to the corresponding FSB frequency of the CPU you adopt.
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
DRAM CAS# Latency
Use this item to adjust the means of memory accessing. Configuration
options: [Auto], [3], [4], and [5]. Please note that the configuration option
[3] is available only for FSB 800 and FSB 533.
DRAM RAS# to CAS# Delay
This controls the latency between the DRAM active command and the
read / write command. Configuration options: [Auto], [2 DRAM Clocks],
[3 DRAM Clocks], [4 DRAM Clocks], [5 DRAM Clocks] and [6 DRAM
Clocks].
DRAM RAS# Precharge
This controls the idle clocks after a precharge command is issued.
Configuration options: [Auto], [2 DRAM Clocks], [3 DRAM Clocks],
[4 DRAM Clocks], [5 DRAM Clocks] and [6 DRAM Clocks].
DRAM RAS# Activate to Precharge
This controls the number of DRAM clocks for TRAS. Configuration
options: [Auto], [4 DRAM Clocks] to [15 DRAM Clocks].