ASROCK P43 PROUSB3 -, Быстрое руководство по установке

Страница: 16 / 127

1 6 1 6
1 6 1 6 1 6
ASRock P43 Pro/USB3 Motherboard
EnglishEnglishEnglishEnglishEnglish
USB 2.0 Headers Besides five default USB 2.0
(9-pin USB10_11)
ports on the I/O panel, there are
(see p.2 No. 21)
three USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
(9-pin USB8_9)
(see p.2 No. 18)
(9-pin USB6_7)
(see p.2 No. 19)
2.6 Onboard Headers and Connectors 2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors 2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATAII Connectors These five Serial ATAII (SATAII)
(SATAII_1 (Port 0):
connectors support SATA data
see p.2, No. 12)
cables for internal storage
(SATAII_2 (Port 1):
devices. The current SATAII
see p.2, No. 13)
interface allows up to 3.0 Gb/s
(SATAII_3 (Port 2):
data transfer rate.
see p.2, No. 14)
(SATAII_4 (Port 3):
see p.2, No. 15)
(SATAII_5 (Port 4):
see p.2, No. 16)
Serial ATA (SATA) Either end of the SATA data cable
Data Cable can be connected to the SATA /
(Optional)
SATAII hard disk or the SATAII
connector on this motherboard.
S
A
T
AII_3 (Port 2) SA
T
AII_1 (Port 0)
SA
T
AII_5 (Port 4) SA
T
AII_4 (Port 3) SA
T
AII_2 (Port 1)