15
LPC Debug Header
This connector supports a
(13-pin LPC1)
Trusted Platform Module (TPM)
(
see p.8, No. 6)
system, which can
securely store keys, digital
certificates, passwords, and
data. A TPM system also helps
enhance network security,
protects digital identities, and
ensures platform integrity.
RESET (Reset Switch):
Connect to the reset switch on the chassis front panel. Press the reset
switch to restart the computer if the computer freezes and fails to perform a
normal restart.
PLED (System Power LED):
Connect to the power status indicator on the chassis front panel. The LED
is on when the system is operating. The LED keeps blinking when the sys-
tem is in S1 sleep state. The LED is off when the system is in S3/S4 sleep
state or powered off (S5).
HDLED (Hard Drive Activity LED):
Connect to the hard drive activity LED on the chassis front panel. The LED
is on when the hard drive is reading or writing data.
The front panel design may differ by chassis. A front panel module mainly
consists of power switch, reset switch, power LED, hard drive activity LED,
speaker and etc. When connecting your chassis front panel module to this
header, make sure the wire assignments and the pin assign-ments are
matched correctly.
PCIRST#
FRAME
PCICLK
* This motherboard supports RS232/422/485 on COM1 port. Please refer to below table for the pin
definition. In addition, COM1 port (RS232/422/485) can be adjusted in BIOS setup utility > Advanced
Screen > Super IO Configuration. You may refer to page 24 for details.
PIN
RS232
RS422
RS485
1
DCD, Data Carrier Detect
TX-
RTX-
2
RXD, Receive Data
TX+
RTX+
3
TXD, Transmit Data
RX+
N/A
4
DTR, Data Terminal Ready
RX-
N/A
5
GND
GND
GND
6
DSR, Data Set Ready
N/A
N/A
7
RTS, Request To Send
N/A
N/A
8
CTS, Clear To Send
N/A
N/A
9
N/A
N/A
N/A
COM1 Port Pin Definition
COM Port Header (RS232/422/485)
(9-pin COM1: see p.8, No. 4)
