background image

4

Contents

1  Introduction .......................................................  5

1.1   Package Contents ......................................................... 5

1.2   Specifications

 ................................................................. 6

1.3   Motherboard Layout ....................................................... 8
1.4   I/O Panel ........................................................................ 9

2  Installation .........................................................  10

2.1   Screw Holes ................................................................... 10
2.2   Pre-installation Precautions ........................................... 10
2.3   Installation of Memory Modules (SO-DIMM) .................. 11  
2.4   Expansion Slots  ............................................................ 12
2.5   Jumpers Setup ............................................................... 13
2.6   Onboard Headers and Connectors ................................ 14

3  UEFI SETUP UTILITY .........................................  17

3.1   Introduction .................................................................... 17

3.1.1  UEFI Menu Bar .................................................... 17
3.1.2  Navigation Keys ................................................... 18

3.2   Main Screen ................................................................... 18
3.3   Advanced Screen ........................................................... 19

3.3.1  CPU Configuration

 ............................................... 20

3.3.2  Chipset Configuration

........................................... 22

3.3.3  Storage Configuration

 .......................................... 23

3.3.4  Super IO Configuration

 ........................................ 24

3.3.5  ACPI Configuration

............................................... 25

3.3.6  USB Configuration

 ............................................... 26

3.3.7  Trusted Computing ............................................... 27

3.4   Hardware Health Event Monitoring Screen ................... 28
3.5   Security Screen ............................................................. 29
3.6   Boot Screen ................................................................... 30
3.7   Exit Screen .................................................................... 32

4  Software Support ..............................................  33

4.1   Install Operating System ................................................ 33
4.2   Support CD Information ................................................. 33

4.2.1  Running Support CD ............................................ 33
4.2.2  Drivers Menu ........................................................ 33
4.2.3  Utilities Menu........................................................ 33
4.2.4  Contact Information .............................................. 33

Содержание NUC-4305UE


































Отзывы: