ASROCK K8SLI-ESATA2, Руководство пользователя

Страница: 30 / 161

2 9 2 9 2 9 2 9 2 9
ASRock K8SLI-eSATA2 Motherboard
2.14 2.14 2.14 2.14 2.14 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking Technology echnology echnology echnology echnology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS
setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is
untied during overclocking, but PCI and PCIE buses are in the fixed mode so that FSB
can operate under a more stable overclocking environment.
2.13 2.13
2.13 2.13
2.13 Using SA Using SA
Using SA Using SA
Using SATTTTTA / SA A / SA
A / SA A / SA
A / SATTTTTAII HDDs W AII HDDs W
AII HDDs W AII HDDs W
AII HDDs Without RAID F ithout RAID F
ithout RAID F ithout RAID F
ithout RAID Functions unctions
unctions unctions
unctions
If you want to install Windows 2000, Windows XP, or Windows XP 64-bit OS on your
SATA / SATAII HDDs without RAID functions, you are allowed to choose non-RAID
mode or AHCI mode. For users who plan to install Windows 2000, Windows XP, or
Windows XP 64-bit OS on your SATA / SATAII HDDs without RAID and Hot Plug
functions, please choose non-RAID mode. However, if you plan to install Windows
2000, Windows XP, or Windows XP 64-bit OS on your SATA / SATAII HDDs without
RAID functions but still keeping Hot Plug function, please choose AHCI mode.
Please follow the below procedures for selecting the mode you need.
A. Using SATA / SATAII HDDs Operating in Non-RAID Mode
1. Enter “SATA Operation Mode” in BIOS setup to set the option from [RAID] to [non-
RAID].
2. Start Windows 2000, windows XP, or Windows XP 64-bit OS installation.
B. Using SATA / SATAII HDDs Operating in AHCI Mode
1. Enter “SATA Operation Mode” in BIOS setup to set the option from [RAID] to [AHCI].
2. Make a SATA / SATAII driver diskette by following the proper steps of section 2.12
on page 28.
3. Start Windows 2000, windows XP, or Windows XP 64-bit OS installation.
EnglishEnglishEnglishEnglishEnglish
This Manual: http://www.manuallib.com/file/2448244