1 4
2.4
Installation of Memory Modules (DIMM)
This motherboard is equipped with five 184-pin DDR (Double Data Rate) DIMM slots.
I.
For 939-Pin CPU users, please install the DIMM into DDR1, DDR2 and DDR3 slots (see
Page 9, No. 32). DDR1 and DDR2 slots support Dual Channel Memory Technology.
Since there are some limitations from AMD, please follow the table below for proper
configuration. Otherwise, the system may not boot up! For best compatibility of dual
channel configuration, it is highly recommended to install two identical (the same
brand, speed, size and chip-type) memory modules into the DDR DIMM slots to
activate Dual Channel Memory Technology. If you have two non-identical DDR
SDRAMs, please install them into DDR1 and DDR3 for 64-bit mode. Besides, please do
not install 3 DDR DIMMs into DDR1, DDR2, and DDR3 at the same time. Otherwise, the
system cannot boot up!
Data Bus
DDR1(Blue)
DDR2 (Blue)
DDR3 (Black)
64 bit
Single Side
Empty
Empty
(Single Channel)
Double Side
Empty
Empty
Empty
Empty
Single Side
Empty
Empty
Double Side
Single Side
Empty
Single Side
Single Side
Empty
Double Side
Double Side
Empty
Single Side
Double Side
Empty
Double Side
128 bit
Single Side
Single Side
Empty
(Dual Channel)
Double Side
Double Side
Empty
II.
For 754-Pin CPU users, please install the DIMM into DDR4 and DDR5 slots (see
Page 9, No. 5). Please note that DDR4 and DDR5 slots DO NOT support Dual Channel
Memory Technology.
This Manual: http://www.manuallib.com/file/2448158
