background image

2

Version 1.0 

Published December 2013 

Copyright©2013 ASRock INC. All rights reserved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or 
translated in any language, in any form or by any means, except duplication of 
documentation by the purchaser for backup purpose, without written consent of 
ASRock Inc.

Products and corporate names appearing in this documentation may or may not 
be registered trademarks or copyrights of their respective companies, and are used 
only for identiication or explanation and to the owners’ beneit, without intent to 
infringe.

 

Disclaimer:

Speciications and information contained in this documentation are furnished for 
informational use only and subject to change without notice, and should not be 
constructed as a commitment by ASRock. ASRock assumes no responsibility for 
any errors or omissions that may appear in this documentation.  

With respect to the contents of this documentation, ASRock does not provide 
warranty of any kind, either expressed or implied, including but not limited to 
the implied warranties or conditions of merchantability or itness for a particular 
purpose.

In no event shall ASRock, its directors, oicers, employees, or agents be liable for 
any indirect, special, incidental, or consequential damages (including damages for 
loss of proits, loss of business, loss of data, interruption of business and the like), 
even if ASRock has been advised of the possibility of such damages arising from any 
defect or error in the documentation or product.

he terms HDMI

TM

 and HDMI High-Deinition Multimedia Interface, and the HDMI 

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United 
States and other countries.

 

his device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: 
(1)  this device may not cause harmful interference, and 
(2)  this device must accept any interference received, including interference that  

may cause undesired operation.

CALIFORNIA, USA ONLY

he Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance 
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the 
California Legislature. When you discard the Lithium battery in California, USA, please 
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”

ASRock Website: http://www.asrock.com

Содержание IMB-183









































Отзывы: