background image

27

3.3.2  Chipset Configuration

DRAM Frequency

 

If  [Auto]  is  selected,  the  motherboard  will  detect  the  memory  module(s) 
inserted and assign the appropriate frequency automatically.

VT-d

 

Intel

®

 Virtualization Technology for Directed I/O helps your virtual machine 

monitor better utilize hardware by improving application compatibility and 
reliability, and providing additional levels of manageability, security, isola-
tion, and I/O performance.

 

Share Memory

 

 

Configure the size of memory that is allocated to the integrated graphics 

 

 

processor when the system boots up.

 

Render Standby

 

 

Use this to enable or disable Render Standby by Internal Graphics Device.

 

 

The default value is [Enabled].

 

Onboard HD Audio

Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If 
you select [Auto].

Front Panel

 

  Select [Auto] or [Disabled] for the onboard HD Audio Front Panel.

Onboard HDMI HD Audio

This allows you to enable or disable the Onboard HDMI HD Audio feature.

Onboard LAN 1 (Intel)

This allows you to enable or disable the Onboard LAN 1 feature.

Содержание iBOX-310M










































Отзывы: