ASROCK H110 Pro BTC+ Скачать руководство пользователя страница 4

Страница: 4 / 6

Page 4

Step 4.

The first mining kit (PCIe riser + graphics card + power connections) should be installed on

slot PCIE2. That is the x16 slot.

Step 5.

Connect the main power supply to the PCIE PWR and SATA PWR headers, and to the standard
24-pin ATX connector and 4/8-pin 12V connector.

Step 6.

Turn on the AC power and install the OS (operating system).

Step 7.

After finishing the OS installation, please install the graphics driver.

Step 8.

Reboot the system to enter the OS and make sure the graphics driver is installed correctly.

Step 9.

Go to device manager to check if the graphics card is detected properly. Shut down the system
and then turn off the AC power.

Step 10.

Install the second mining kit on the top PCIe x1 slot (which is closest to CPU) and repeat steps
3, 4, 8 and 9.

Содержание H110 Pro BTC+

Страница 3: ...nstall the Skylake or Kaby Lake CPU and DDR4 memory on the H110 Pro BTC Step 2 Plug the graphics card into the PCIe riser card and make sure the latch is locked properly Step 3 Connect the power supply to the graphics card AND the PCIe riser card directly ...

Страница 5: ...er mining kits on the other PCIe x1 slots from top to bottom Install one kit at a time and repeat steps 3 4 8 and 9 every time Step 12 After installing the 13 mining kits graphics driver s and software the system is ready for mining ...

Страница 6: ...ant to use integrated graphics as main output please set BIOS Advanced Chipset Configuration IGPU Multi Monitor Enabled BIOS Advanced Chipset Configuration Primary Graphics Adapter Onboard Then install the OS using integrated graphics first 3 Please reserve sufficient space between all graphics cards for good heat dissipation ...