29
29
29
29
29
System Fan Setting
The system fan improves the air circulation of the computer's enclosure.
Use this option to adjust the fan speed. The default value is [Full On].
Configuration options: [Full On], [Manual]. Manual allow user to set Target
Fan Speed from level 1-9
Legacy USB Support
Use this option to select legacy support for USB devices. There are four
configuration options: [Enabled], [Auto], [Disabled] and [BIOS Setup
Only]. The default value is [Enabled]. Please refer to below descriptions
for the details of these four options:
[Enabled] - Enables support for legacy USB.
[Auto] - Enables legacy support if USB devices are connected.
[Disabled] - USB devices are not allowed to use under legacy OS and
BIOS setup when [Disabled] is selected. If you have USB compatibility
issue, it is recommended to select [Disabled] to enter OS.
[BIOS Setup Only] - USB devices are allowed to use only under BIOS
setup and Windows / Linux OS.
3.5
3.5
3.5
3.5
3.5 Hardware Health Event Monitoring Screen
Hardware Health Event Monitoring Screen
Hardware Health Event Monitoring Screen
Hardware Health Event Monitoring Screen
Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU
fan speed, chassis fan speed, and the critical voltage.
BIOS SETUP UTILITY
Hardware Health Event Monitoring
Select Screen
Select Item
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
CPU Temperature
M / B Temperature
NB Fan Speed
System Fan Speed
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
: 34 C / 93 F
: 4218 RPM
: 2721 RPM
: 1.208V
: 3.328V
: 4.848V
: 12.460V
: 31 C / 87 F
Main Smart
Advanced
Boot Security Exit
H/W Monitor
Fan configuration
mode setting
System Fan Setting
[Full on]
