ASROCK EPC612D4U, Руководство пользователя

Страница: 36 / 92

30
English
2.6 Expansion Slots (PCI Express Slots)
here are 3 PCI Express slots on this motherboard.
PCIE slot:
PCIE7 and PCIE5 (PCIE 3.0 x16 slot, from CPU 1) are used for PCI Express x16 lane width
graphics cards.
PCIE6 (PCIE 3.0 x8 slot, from CPU 1) is used for PCI Express x8 lane width graphics cards.
Slot Generation Mechnical Eletrical Source
PCIE 7 3.0 x16 x16 CPU 1
PCIE 6 3.0 x8 x8 CPU 1
PCIE 5 3.0 x16 x16 CPU 1
CI Express Slot Coniguration
PCIE 7 PCIE 6
Single Graphics Card x16
Two Graphics Cards x8 x8
he PCIE5 slot shares lanes with the mini SAS HD connector (LSI_SAS_0_7). When LSI_
SAS_0_7 connector is populated, PCIE5 slot will operate at up to x8 mode.
PCIE 5 LSI3008
No Mini SAS HD Connector x16
Mini SAS HD Connector
Connected
x8 Populated
Installing an expansion card
Step 1. Before installing an expansion card, please make sure that the power
supply is switched of or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2. Remove the system unit cover (if your motherboard is already installed
in a chassis).
Step 3. Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
Step 4. Align the card connector with the slot and press irmly until the card is
completely seated on the slot.
Step 5. Fasten the card to the chassis with screws.
Step 6. Replace the system cover.