ASROCK EP2C612 WS, Руководство пользователя

Страница: 39 / 104

32
English
USB 3.0 Header
(19-pin USB3_5_6)
(see p.6, No. 36)
Besides four default USB 3.0
ports on the I/O panel, there
is one USB 3.0 header on this
mot herboard. This USB 3.0
header can support two USB
3.0 ports.
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.6, No. 57)
J_SENSE
OUT2_L
1
MIC_RET
PRESENCE#
GND
OUT2_R
MIC2_R
MIC2_L
OUT_RET
his header is for connecting
audio devices to the front
audio panel.
1. High Deinition Audio supports Jack Sensing, but the panel wire on the chassis must sup-
port HDA to function correctly. Please follow the instructions in our manual and chassis
manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by the
steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to connect
them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel and
adjust “Recording Volume”.
1
Dummy
GND
GND
Vbus
GND
GND
IntA_
Vbus
In
IntA_PA_D-
IntA_
IntA_PA_SSTX-
IntA_PA_SSRX-
IntA_PB_SSRX-
IntA_
IntA_PB_SSTX-
IntA_P
IntA_PB_D-
In