ASROCK EP2C602D16FM, Руководство пользователя

Страница: 31 / 78

EP2C602D16FM
25
English
Non Maskable Interrupt
Button Header
(NMI_BTN1)
(see p.6, No. 20)
1
CONTROL
GND
Please connect a NMI device
to this header.
Intelligent Platform
Management Bus header
(4-pin IPMB_1)
(see p.6, No. 2)
IPMB_SDA
IPMB_SCL
GND
No connect
This 4-pin connector is used
to provide a cabled base-board
or front panel connection for
value added features and 3rd-
party add-in cards, such as
Emergency Management cards,
t h a t p r o v i d e m a n a g e m e n t
features using the IPMB.
hermal Sensor Header
(3-pin TR1)
(see p.6, No. 25)
1
TR1 TR1
GND
Please connect the thermal
sensor cable to either pin 1-2
or pin 2-3 and the other end to
the device which you wish to
monitor its temperature.
Baseboard Management
Controller SMBus Header
(5-pin BMC_SMB_1)
(see p.6, No. 1)
BMC_SMB_PRESENT_1_N
Power
BMC_SMBCLK
GND
BMC_SMBDATA
his header is used for the SM
BUS devices.
SCU Connector
(SCU_0-3)
(see p.6, No. 34)
The SCU connector support
s SAS/SATA d at a c ables for
internal storage devices. The
current SAS2/SATA3 interface
a l low s up to 6 . 0 G b/s d at a
transfer rate. For connecting
SAS HDDs, please contact SAS
data cable dealers.