61
2.7 Jumpers Setup
The illustration shows how jumpers are
setup. When the jumper cap is placed on
pins, the jumper is “Short”. If no jumper cap
is placed on pins, the jumper is “Open”. The
illustration shows a 3-pin jumper whose
pin1 and pin2 are “Short” when jumper cap
is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
1-2:
Default
2-3:
ME recovery mode
-12V Switch Header
(3-pin 12V_SW1)
1-2:
Default
2-3:
PSU (-12V)
