ASROCK C226 WS, Руководство пользователя

Страница: 26 / 60

26
2.9 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA3 Connectors These ten Serial ATA3 (SATA3)
(SATA3_0_1: see p.9, No. 11)
connectors support SATA data
(SATA3_2_3: see p.9, No. 12)
cables for internal storage
(SATA3_4_5: see p.9, No. 13)
devices. The current SATA3
(SATA3_M0_M1: see p.9, No. 9)
interface allows up to 6.0 Gb/s
(SATA3_M2_M3: see p.9, No. 10)
data transfer rate.
Serial ATA (SATA) Either end of the SATA data
Data Cable cable can be connected to the
(Optional)
SATA / SATA2 / SATA3 hard
disk or the SATA2 / SATA3
connector on this motherboard.
USB 2.0 Headers Besides four default USB 2.0
(9-pin USB4_5)
ports on the I/O panel, there are
(see p.9, No. 19)
three USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB 2.0
ports.
(9-pin USB6_7)
(see p.9, No. 20)
SA
TA3_4_5 SA
TA3_2_3 SA
TA3_0_1 SA
TA3_M2_M3 SA
TA3_M0_M1