ASROCK C216 WS Скачать руководство пользователя страница 33

Страница: 33 / 69

Infrared Module Header

This header supports an

(5-pin IR1)

optional wireless transmitting

(see p.11, No. 25)

and receiving infrared module.

USB 3.0 Header

Besides six default USB 3.0

(19-pin USB3_6_7)

ports on the I/O panel, there is

(see p.11, No. 8)

one USB 3.0 header on this

motherboard. This USB 3.0

header can support two USB 3.0

ports.

IRTX

+5VSB

DUMMY

IRRX

GND

DUMMY

IntA_P7_D-

GND

IntA_

GND

IntA_P7_SSTX-

IntA_

IntA_P7_SSRX-

Vbus

IntA_P6_SSRX-

IntA_

GND

IntA_P6_SSTX-

IntA_

GND

IntA_P6_D-

Front Panel Audio Header

This is an interface for front

(9-pin HD_AUDIO1)

panel audio cable that allows

(see p.11, No. 27)

convenient connection and

control of audio devices.

J_SENSE

OUT2_L

MIC_RET

PRESENCE#

GND

OUT2_R

MIC2_R

MIC2_L

OUT_RET

1. High Deinition Audio supports Jack Sensing, but the panel wire on the

chassis must support HDA to function correctly. Please follow the

instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio

header as below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t need

to connect them for AC’97 audio panel.

E. To activate the front mic.

For Windows

8 / 8 64-bit / 7 / 7 64-bit OS:

Go to the “FrontMic” Tab in the Realtek Control panel. Adjust

“Recording Volume”.

Содержание C216 WS





































































Результаты поиска

Содержание C216 WS

Отзывы:

ASROCK C216 WS, Руководство пользователя, Страница: 33 / 69

Результаты поиска

Содержание C216 WS

Отзывы: