background image

67

Chapter 4: Software Support 

4.1  Install Operating System 

This motherboard supports various Microsoft

®

 Windows

®

 operating systems: 7 / 7 

64-bit / Vista

TM

 / Vista

TM 

64-bit / XP / XP 64-bit. Because motherboard settings and 

hardware options vary, use the setup procedures in this chapter for general refer-
ence only. Refer your OS documentation for more information.

4.2  Support CD Information

The Support CD that came with the motherboard contains necessary drivers and 
useful utilities that enhance the motherboard’s features. 

4.2.1  Running The Support CD 

To begin using the support CD, insert the CD into your CD-ROM drive. The 
CD automatically displays the Main Menu if “AUTORUN” is enabled in your 
computer. If the Main Menu does not appear automatically, locate and double 
click on the file “ASRSETUP.EXE” in the Support CD to display the menu.

4.2.2  Drivers Menu

The Drivers Menu shows the available device’s drivers if the system detects 
installed devices. Please install the necessary drivers to activate the devices.
 

4.2.3  Utilities Menu

The Utilities Menu shows the application softwares that the motherboard sup-
ports. Click on a specific item then follow the installation wizard to install it.

4.2.4  Contact Information

If you need to contact ASRock or want to know more about ASRock, welcome 
to visit ASRock’s website at http://www.asrock.com; or you may contact your 
dealer for further information.

Содержание B75 Pro3





































































Отзывы: