ASROCK ALIVENF5-VSTA R2.0 Скачать руководство пользователя

Страница: 6 / 26

Please select A and B for Windows

2000 / XP / XP 64-bit in RAID mode. (There are

two RAID drivers needed for RAID mode, you have to select them separately. Please

specify the first RAID driver and then specify again for the second one.)

NOTE. If you install Windows

2000 / Windows

XP / Windows

XP 64-bit on IDE

HDDs and want to manage (create, convert, delete, or rebuild) RAID functions

on SATA / SATAII HDDs, you still need to set up “SATA Operation Mode” to [RAID]

in BIOS first. Then, please set the RAID configuration by using the Windows RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 3: Use “RAID Installation Guide” to set RAID configuration.

Before you start to configure RAID function, you need to check the RAID installation

guide in the Support CD for proper configuration. Please refer to the BIOS RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 4: Install Windows

2000 / XP / XP 64-bit OS on your system.

After step 1, 2, 3, you can start to install Windows

2000 / Windows

XP / Windows

XP 64-bit OS on your system. At the beginning of Windows

setup, press F6 to install

a third-party RAID driver. When prompted, insert the SATA / SATAII driver diskette

containing the NVIDIA

RAID driver. After reading the floppy disk, the drivers will be

presented. Select the drivers to install. The drivers are as below:

1.3.2 Installing Windows

Vista

/ Vista

64-bit With RAID

Functions

If you want to install Windows

Vista

/ Windows

Vista

64-bit on your SATA / SATAII

HDDs with RAID functions, please follow below steps.

STEP 1: Set Up BIOS.

Enter BIOS SETUP UTILITY

Advanced screen

IDE Configuration.

Set the “SATA Operation Mode” option to [RAID].

STEP 2: Use “RAID Installation Guide” to set RAID configuration.

Before you start to configure RAID function, you need to check the RAID installation

guide in the Support CD for proper configuration. Please refer to the BIOS RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 3: Install Windows

Vista

/ Vista

64-bit OS on your system.

Insert the Windows

Vista

/ Windows

Vista

64-bit optical disk into the optical

drive to boot your system, and follow the instruction to install Windows

Vista

Windows

Vista

64-bit OS on your system. When you see “Where do you want to

A. NVIDIA RAID Driver (required)

B. NVIDIA nForce Storage Controller (required)

Содержание ALIVENF5-VSTA R2.0



























Результаты поиска

Содержание ALIVENF5-VSTA R2.0

Отзывы:

Похожие инструкции для ALIVENF5-VSTA R2.0

Бренды по названию

Популярные бренды

ASROCK ALIVENF5-VSTA R2.0, Руководство по установке

Результаты поиска

Содержание ALIVENF5-VSTA R2.0

Отзывы:

Похожие инструкции для ALIVENF5-VSTA R2.0

Бренды по названию

Популярные бренды