ASROCK ALIVENF5-ESATA2 PLUS - V1.0, Руководство по установке

Страница: 30 / 208

3 0 3 0
3 0 3 0 3 0
ASRock ALiveNF5- Motherboard
EnglishEnglishEnglishEnglishEnglish
Please select A and B for Windows ® 2000 / XP / XP 64-bit in RAID mode. (There are two
RAID drivers needed for RAID mode, you have to select them separately. Please specify
the first RAID driver and then specify again for the second one.)
NOTE. If you install Windows ® 2000 / Windows ® XP / Windows ® XP 64-bit on IDE
HDDs and want to manage (create, convert, delete, or rebuild) RAID functions
on SATA / SATAII HDDs, you still need to set up “SATA Operation Mode” to [RAID]
in BIOS first. Then, please set the RAID configuration by using the Windows RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Use “RAID Installation Guide” to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
®
2000 / XP / XP 64-bit OS on your system.
After step 1, 2, 3, you can start to install Windows
®
2000 / Windows
®
XP / Windows
®
XP
64-bit OS on your system. At the beginning of Windows
®
setup, press F6 to install a
third-party RAID driver. When prompted, insert the SATA / SATAII driver diskette contain-
ing the NVIDIA
®
RAID driver. After reading the floppy disk, the drivers will be presented.
Select the drivers to install. The drivers are as below:
2.14.2 Installing Windows 2.14.2 Installing Windows 2.14.2 Installing Windows 2.14.2 Installing Windows 2.14.2 Installing Windows
®
Vista Vista Vista Vista Vista
TM TM TM TM TM
/ Vista / Vista / Vista / Vista / Vista
TM TM TM TM TM
64-bit With 64-bit With 64-bit With 64-bit With 64-bit With
RAID F RAID F
RAID F RAID F RAID Functions
unctions
unctions unctions unctions
If you want to install Windows ® Vista TM / Windows ® Vista TM 64-bit on your SATA / SATAII
HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set the “SATA Operation Mode” option to [RAID].
STEP 2: Use “RAID Installation Guide” to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows ® Vista TM / Vista TM 64-bit OS on your system.
Insert the Windows ® Vista TM / Windows ® Vista TM 64-bit optical disk into the optical drive
to boot your system, and follow the instruction to install Windows ® Vista TM / Windows ®
Vista TM 64-bit OS on your system. When you see “Where do you want to
A. NVIDIA RAID Driver (required)
B. NVIDIA nForce Storage Controller (required)