ASROCK ALIVEN570SLI-ESATA2, Руководство пользователя

Страница: 27 / 58

2 7 2 7 2 7 2 7 2 7
C
B
GND
+5V
SPDIFOUT
blue
black
blue
black
GND
SPDIFOUT
blue
black GND
SPDIFOUT
A
HDMI_SPDIF Cable Please connect the black end (A)
(Optional)
of HDMI_SPDIF cable to the
HDMI_SPDIF header on the
motherboard. Then connect the
white end (B or C) of
HDMI_SPDIF cable to the
HDMI_SPDIF connector of HDMI
VGA card.
A. black end B. white end (2-pin) C. white end (3-pin)
1
GND
+5V
SPDIFOUT
+12V
GND
+12V
1
RXTPBM_0
GND
RXTPAM_0
RXTPBP_0
GND
RXTPAP_0
HDMI_SPDIF Header HDMI_SPDIF header, providing
(3-pin HDMI_SPDIF1)
SPDIF audio output to HDMI VGA
(see p.11, No. 27)
card, allows the system to
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
IEEE 1394 Header Besides one default IEEE 1394
(9-pin FRONT_1394)
port on the I/O panel, there is one
(see p.11 No. 24)
IEEE 1394 header
(FRONT_1394) on this
motherboard. This IEEE 1394
header can support one IEEE
1394 port.
ATX 12V Power Connector Please note that it is necessary
(4-pin ATX12V1)
to connect a power supply with
(see p.11, No. 3)
ATX 12V plug to this connector.
Failing to do so will cause power
up failure.
SLI/XFIRE Power Connector It is not necessary to use this
(4-pin SLI/XFIRE_PWR1)
connector, but please connect it
(see p.11 No. 36)
with a hard disk power connecor
when two graphics cards are
plugged to this motherboard at
the same time.
SLI/XFIRE_POWER1