ASROCK A230GC, Руководство по установке

Страница: 8 / 86

8 88
88
ASRock A330GC / A230GC Motherboard
EnglishEnglishEnglishEnglishEnglish
2. Installation 2. Installation 2. Installation 2. Installation 2. Installation
A330GC / A230GC is a Mini-IXT form factor (6.7" x 6.7", 17.0 x 17.0 cm) motherboard.
Before you install the motherboard, study the configuration of your chassis to
ensure that the motherboard fits into it.
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so may cause physical injuries to you and
damages to motherboard components.
2.1 Screw Holes 2.1 Screw Holes 2.1 Screw Holes 2.1 Screw Holes 2.1 Screw Holes
Place screws into the holes indicated by circles to secure the motherboard to the
chassis.
Do not over-tighten the screws! Doing so may damage the motherboard.
2.2 Pre-installation Precautions 2.2 Pre-installation Precautions 2.2 Pre-installation Precautions 2.2 Pre-installation Precautions 2.2 Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any component.
2. To avoid damaging the motherboard components due to static electricity, NEVER
place your motherboard directly on the carpet or the like. Also remember to use
a grounded wrist strap or touch a safety grounded object before you handle
components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded antistatic pad or
in the bag that comes with the component.
Before you install or remove any component, ensure that the power is
switched off or the power cord is detached from the power supply.
Failure to do so may cause severe damage to the motherboard, peripherals,
and/or components.