29
2.9 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA3 Connectors
These six Serial ATA3
(SATA3_1: see p.15, No. 18)
(SATA3) connectors support
(SATA3_2: see p.15, No. 17)
SATA data cables for internal
(SATA3_3: see p.15, No. 13)
storage devices. The current
(SATA3_4: see p.15, No. 12)
SATA3 interface allows up to
(SATA3_5: see p.15, No. 10)
6.0 Gb/s data transfer rate.
(SATA3_6: see p.15, No. 11)
1
USB_PWR
P-8
GND
DUMMY
USB_PWR
P+8
GND
P-9
P+9
USB 2.0 Headers
Besides six default USB 2.0
(9-pin USB_6_7)
ports on the I/O panel, there
(see p.15 No. 23)
are three USB 2.0 headers on
this motherboard. Each USB 2.0
header can support two USB
2.0 ports.
(9-pin USB_8_9)
(see p.15 No. 25)
(9-pin USB_10_11)
(see p.15 No. 26)
P-7
P+7
GND
DUMMY
USB_PWR
USB_PWR
P-6
P+6
GND
1
Serial ATA (SATA)
Either end of the SATA data
Data Cable
cable can be connected to the
(Optional)
SATA / SATA2 / SATA3 hard
disk or the SATA3 connector on
this motherboard.
SATA3_2
SA
TA3_3 SA
TA3_5
SA
TA3_4 SA
TA3_6
SATA3_1
1
USB_PWR
P-10
GND
DUMMY
USB_PWR
P+10
GND
P-11
P+11
