45
3.4.4 Storage Coniguration
Onboard SATA Controller
Use this item to enable or disable the “Onboard SATA Controller” feature.
SATA Operation Mode
Use this item to adjust Onboard SATA Operation Mode. The default value
of this option is [AHCI]. Coniguration options: [AHCI], [IDE] and [RAID].
If you set this item to RAID mode, it is suggested to install SATA ODD
driver on SATAII_3 (PORT 5) and SATAII_4 (PORT 6) ports.
SATA IDE Combined Mode
This item is for SATAII_3 (PORT 5) and SATAII_4 (PORT 6) ports. Use this
item to enable or disable SATA IDE combined mode. The default value is
[Enabled].
If you want to build RAID on SATAII_3 (PORT 5) and SATAII_4 (PORT 6)
ports, please disable this item.
BIOS SETUP UTILITY
S
torage Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Onboard SATA Controller
SATA Operation Mode
SATA IDE Combined Mode
SATAII_1
SATAII_2
SATAII_3
SATAII_4
[Enabled]
[AHCI]
[Enabled]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
Configure onboard
serial ATA
controller.