1 3
1 3
1 3
1 3
1 3
ASRock 4Core1600-DVI Motherboard
EnglishEnglishEnglishEnglishEnglish
Installing a DIMM
Installing a DIMM
Installing a DIMM
Installing a DIMM
Installing a DIMM
Please make sure to disconnect power supply before adding or
removing DIMMs or the system components.
Step 1.
Unlock a DIMM slot by pressing the retaining clips outward.
Step 2.
Align a DIMM on the slot such that the notch on the DIMM matches the break
on the slot.
Recommended Memory Configurations
(DS: Double Side, SS: Single Side)
DDRII_1 DDRII_2 DDRII_3 DDRII_4
(Yellow Slot) (Orange Slot) (Yellow Slot) (Orange Slot)
1 memory module DS/SS* X
X X
2 memory modules DS/SS
X DS/SS X
2 memory modules X
DS/SS X
DS/SS
3 memory modules SS
SS
DS/SS
X
4 memory modules SS SS SS SS
* If you only install one memory module, you can install it to any one of the four slots.
The DIMM only fits in one correct orientation. It will cause permanent
damage to the motherboard and the DIMM if you force the DIMM into the slot
at incorrect orientation.
Step 3.
Firmly insert the DIMM into the slot until the retaining clips at both ends fully
snap back in place and the DIMM is properly seated.
