18
PB
English
3.4 Add-on Card
Removing the Blanking Plate from the Chassis
1. Remove the screw securing the blanking plate on the chassis. Keep this screw for later
use.
2. Push the the right end of the blanking plate toward the chassis.
3. Slide the blanking plate out sideways.
4. Reverse the procedure to install the add-on card in the chassis.
1. You can install an add-on card to the chassis only when you have a riser card installed on
the server board.
2. Before installing the add-on card, power off the server and unplug the power cord.
1
2
3
