24
25
English
Non Maskable Interrupt
Button Header
(NMI_BTN1)
(see p.6, No. 32)
1
CONTROL
GND
Please connect a NMI device
to this header.
Baseboard Management
Controller SMBus Header
(5-pin BMC_SMB1)
(see p.6, No. 29)
BMC_SMB_PRESENT_1_N
Power
BMC_SMBCLK
GND
BMC_SMBDATA
This header is used for the SM
BUS devices.
Thermal Sensor Header
(3-pin TR1)
(see p.6, No. 26)
1
TR1
TR1
GND
Please connect the thermal
sensor cable to either pin 1-2
or pin 2-3 and the other end to
the device which you wish to
monitor its temperature.
PWM Configuration
Header
(3-pin PWM_CFG1)
(see p.6, No. 10)
GND
SMB_DATA_VSB
SMB_CLK_VSB
1
This header is used for PWM
configurations.
TPM Header
(13-pin TPM1)
(see p.6, No. 25)
+3V
+3V
GND
LAD3
LFRAME
GND
24M
RST#
LAD0
LAD2
GND
+3V
LAD1
1
This connector supports SPI
Trusted Platform Module
(TPM) system, which can
securely store keys, digital
certificates, passwords, and
data. A TPM system also helps
enhance network security,
protects digital identities, and
ensures platform integrity.
Clear CMOS Pads
(CLRMOS1)
(see p.6, No. 31)
This allows you to clear the
data in CMOS. To clear CMOS,
take out the CMOS battery and
short the Clear CMOS Pad.
