18
19
English
Serial General Purpose
Input/Output Headers
(7-pin SATA_SGPIO1)
(see p.6, No. 24)
(7-pin SATA_SGPIO2)
(see p.6, No. 25)
1
SLOAD
SCLOCK
GND
GND
SDATAOUT
The headers support Serial
Link interface for onboard
SATA connections.
System Fan Connectors
(4-pin FAN1)
(see p.6, No. 8)
(4-pin FAN2)
(see p.6, No. 1)
(4-pin FAN3)
(see p.6, No. 7)
FAN_SPEED
FAN_SPEED_CONTROL
FAN_VOLTAGE_CONTROL
GND
4 3 2 1
Please connect the fan cables to
the fan connectors and match
the black wire to the ground
pin. All fans supports Fan
Control.
ATX 4-PIN Power
Connector
(4-pin ATXPWR1
(ATX 24pin-to-4pin)
)
(see p.6, No. 4)
1
2
3
4
ATX_PWROK
PSON#
GND
ATX_+5VSB
The motherboard provides one
4-pin power/signal connector
which is a required input for
ATX power source.
When using ATX power, it is
necessary to use a 24pin-to-
4pin power cable to connect
between the 24pin power
connector of PSU and the
ATX12V2 connector on the
motherboard for power supply
and signal communication.
For DC-IN 12V application,
it is not necessary to use this
ATX 4-PIN power connector.
*Caution: Misconnection between the
ATXPWR1 and the HDDPWR1 con-
nectors may permanently damage the
motherboard.
