E3C236D4I-44E85
16
17
English
2.5 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(see p.6, No. 10)
ME Recovery Mode
Normal Mode (Default)
Security Override Jumper
(3-pin SEC_OR1)
(see p.6, No. 24)
Flash Descriptor Security
Override
Not Override (Default)
CPU PECI Mode Jumper
(3-pin PECI1)
(see p.6, No. 9)
CPU PECI connect to PCH
CPU PECI connect to BMC
(Default)
