D15X0D4I Series
20
21
English
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.
2.6 Onboard Headers and Connectors
Serial ATA3 Connectors
(SATA_4)
(No. 15)
(SATA_5)
(No. 17)
These two Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
Serial ATA3 DOM
Connector
(SATA_4)
(No. 15)
The SATA3 DOM
connector supports
both a SATA DOM
(Disk-On-Module) and
a SATA data cable for
internal storage device.
Mini SAS Connector
(SATA_0_3)
(No. 24)
This connector supports
MiniSAS-to-SATA or
MiniSAS-to-MiniSAS
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate. Each connector is
used to connect to four
HDDs.
USB 2.0 Header
(4-pin USB_1)
(No. 11)
GND
P+0
P-0
USB_PWR
1
There is one USB 2.0 header on
this motherboard, and it can
support one USB 2.0 port.
*You can see p.6~8 for motherboard layout.
SATA_4
SATA_5
SATA_4
