ASRock Industrial IMB-1712, Руководство пользователя

Страница: 21 / 44

21
Front Panel Audio Header This is an interface for front
(9-pin HD_AUDIO1)
panel audio cable that allows
(see p.8 No. 30)
convenient connection and
control of audio devices.
1. High Definition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don’t
need to connect them for AC’97 audio panel.
E. To activate the front mic.
Go to the “FrontMic” Tab in the Realtek Control panel. Adjust
“Recording Volume”.
ATX 12V Power Connector This motherboard provides an
(8-pin ATX12V1)
8-pin ATX 12V power
(see p.8 No. 2)
connector. To use a 4-pin ATX
power supply, please plug it
along Pin 1 and Pin 5.
ATX Power Input Connector This motherboard provides
(24-pin ATXPWR1)
a 24-pin ATX power connector.
(see p.8 No. 6)
To use a 20-pin ATX power
supply, please plug it along Pin
1 and Pin 13.
12
1
24
13
USB 3.2 Gen1 Header There is one header on this
(19-pin USB3_5_6, see p.8, No. 15)
motherboard. This header can
support two ports.
4 1
8 5
1
In
ID
IntA_P1_D-
GND
IntA_
GND
IntA_P1_SSTX-
IntA_
IntA_P1_SSRX-
Vbus Vbus
Vbus
IntA_P0_SSRX-
IntA_
GND
IntA_P0_SSTX-
IntA_
GND
IntA_P0_D-
In
1
PIN Signal
Name PIN
Signal
Name
PIN Signal
Name PIN
Signal
Name
PIN Signal
Name
5 GND 4
TBT_
SLP_S5_
S4#
3
SLP_
S3#
2
TBCIO_
PLUG_
EVENT_
R2
1
TB_
FRC_
PWR
Thunderbolt AIC Connector Please connect a Thunderbolt™
(5-pin TB1)
add-in card (AIC) to the
(see p.8, No. 14)
Thunderbolt AIC connector via
the GPIO cable.