1. 2. 3. 4. 5. 6.
◎
When power is on, press
UNIT-Key to switch the calibration unit of pressure or temperature
(This setting is done separately)
Press
UNIT-Key for 2-second until the calibration unit is shown. Then, press UNIT-Key to make
selection. Press TIRE-Key to confirm the unit , the system will return to “Power-On” screen
。
1. 2. 3. 4. 5. 6.
◎
When making any adjustments on the settings (pressure & temperature setting done separately), first, press
UNIT-Key and press TIRE-Key in the same time. The display would show as diagram 1.
(Hi.P.) setting.
Press “MODE-KEY” to make a selection from diagram 1~6
, make sure to press TIRE-KEY after a specific
selection.
(To quit the above diagram 1~6 selection mode, simply press UNIT-Key)
Illustration of above diagrams:
1. To adjust the H-Pressure Alarm value
(Internal Setting: : 40PSI/ 2.79bar/ 279kPa )
2. To adjust the L-Pressure Alarm value (
Internal Setting: 30PSI/ 2.10bar/ 210kPa )
3. To adjust H-Temperature Alarm value
(Internal Setting: 8
0℃/ 176℉
)
4. Tire Rotation
(This feature only works for Internal Type Valve Sensors)
5. Options of LED backlight on/off
(ON or OFF )
6. Number of wheels shown on display
。
(3 types: 2, 4, or 5 wheels)
◎
FL wheel H. pressure
◎
FR wheel H. pressure
◎
RL wheel L. pressure
◎
RR wheel L. pressure
◎
RL wheel H. temperature
◎
FR
wheel sensor malfunction
◎
FR wheel sensor L. battery
◎
Display L. battery
(The sign is flashing)
(Sign on FR wheel&
LO-BATT
)
(
LO-BATT
sign flashing)
COWEAHTH PRECISION TECH. CO., LTD.
ASPIRIT ENTERPRISE, INC.
Email:[email protected]
