Aspire MIDI HS588, Руководство пользователя

Страница: 10 / 20

User Manual
HS589
1.The scooter can be pushed manually by pushing the lever forward to N position (J).
2.Before driving, make sure to engage the free-wheeling lever (J) to D position.
Its extremely dangerous and forbidden to drive on the scooter when
free-wheeling lever is disengaged and declining a slope.
8
(J)
Figure 10
(H)
(G)
Figure 11
Figure 13
Figure 12
(K)
(L)
•
CIRCUIT BREAKER (See Fig. 12)
1.If the scooter's circuit system malfunction or over loaded, the circuit breaker (K) will
automatically switch off the power to ensure safety.
2.After automatically power switch off by press the
circuit breaker can be reset.
•
TILLER ANGLE ADJUSTMENT (See Fig. 13)
1.To adjust tiller angle by pushing down the tiller angle
adjustment (L).
Tiller angle adjustment forbidden to hang any
objects.
OPERATING YOUR SCOOTER
This scooter has an automatic braking system. Release the thumb
control and the brakes will engage.
You can make the following adjustments to increase your comfort when driving ：
Before beginning your journey with your new scooter, make sure that the scooter is on
a level surface and clear of any obstacles. Although your scooter is able to climb slopes
it is safer to practice on a leveled surface.
•
adjust the seat height and location.
•
adjust the armrest width.
•
adjust the tiller to a comfortable position.
1.Before operating your scooter, check the following:
•
the free-wheeling lever is engaged.
•
the speed dial is at the picture of the turtle.
2.Sit on the scooter and turn on the key. All battery gauge LED lights should be lit.
The Self-Diagnostic Warning Light should not be blinking.
3.When your hands rest comfortably on the handle bar, the thumb control levers should
be within reach. The right lever moves the scooter forward; the left one moves it in
reverse. When you release the Throttle, the scooter will stop.
4.Steer the scooter by turning the whole tiller in the direction you want to go.
5.Practice driving where there are no obstacles. Start at the slowest speed and drive
forward and backward; make some turns. As you get more comfortable you can
increase the speed by turning the speed dial toward the picture of the rabbit.