Aspira TWLFZ-170, Инструкция пользователя

Страница: 9 / 13

8
Door opening from left side
Door opening from right side
1. Remove the screws (6) which fix the worktop(7) to disassembly the worktop.
2. Remove the two screws (1) that hold the upper hinge (5) (right side) to the frame.
Take away the upper hinge (5).
3. Lift the door and place it on a padded surface to prevent scratching it.
4. Remove the two screws (8) that hold the lower hinge (2) and make sure to remove
the lower hinge (2).
5. Remove the left front leg (4) and transfer it to the right side.
6. Before placing this lower hinge (2), remove the blot-pin (9) and reverse the direction
of the lower hinge (2). Then install the lower hinge (2) onto the left side of the lower
frame with two screws (8).
7. Insert the bolt-pin (9) to the lower hinge (2).
8.
9. While holding the door in the closed position secure the upper hinge (5) in the top
frame of left side with two screws (1). Please remember that do not tighten the two
screws (1) until the top of the door is levelled with the counter top.
10. Install the worktop onto the top of the cabinet with screws (6).
Set the door into place making sure the door seals at the lower hinge (2).