4.
⚠
Never exceed the manufacturer's recommended material maximum temperature.
Adjust the flame by turning the knob on the regulator.
Страница 1: ...e crack sealant such as GemSeal SealMaster Durafill Craftco or Maxwell 7 There is absolutely NO water in or around the kettle 8 You are wearing a protective face shield 9 You are wearing heat and fire resistant protective gloves 10 You are wearing heat and fire resistant protective clothing which covers all exposed skin Part 1 How to Load and Light your Melter Inspect and ensure there are no leaks...
Страница 2: ...2 3 Remove the torch from the machine and turn the regulator knob two turns CLOCKWISE so that the propane starts to flow Ignite the torch Insert the torch to the torch holder ...
Страница 3: ...4 Never exceed the manufacturer s recommended material maximum temperature Adjust the flame by turning the knob on the regulator ...
Страница 4: ...crack sealant along the bottom and prevents hot spots from forming which can alter the effectiveness of the sealant after applied Agitation also prevents chunks of over heated material from forming which will eventually plug or block your flow valve which can slow down material flow Part 3 Dispensing Crack Filler Once you have effectively liquefied the crack sealant you may begin to dispense it fr...
