Aspes ATV40, Руководство пользователя

Страница: 6 / 16

Panel Control Keys
Right
Oown
Note:
The illustration is a reference image, your
device may differ
1. Power LEO indicator and remate receiving window.
2. Rocker button combination key:
Power on ar standby with
OK
rocker:
G). When Plugged power cord into the electrical
socket, you can press
OK
rocker to turn on the
TV.
@. In power on state, press OK rocker to display the
function menu, then move rocker Left/Right to
select
Power
and press
OK
rocker to switch to
standby mode.
After turn on the TV, Press
OK
Rocker:
G). In non-OSO menu operation, press
OK
rocker to
display the menu which includes 4 sorts: Menu,
Source, Power, Exit.
@. Ouring the menu operation, press
OK
rocker to
confirm the operation, the function is the same
with pressing
[OK]
key on the remate control.
Move rocker Left/Right:
G). In non-OSO menu operation, move rocker Left/
Right to decrease/increase the volume, the
function is the same with pressing
[VOL-]/[VOL+]
key on the remate control.
@. In OSO menu operation, move rocker Left/Right
5
to adjust the analog value of selected item, the
function is the same with pressing [
◄]/[►] key
on the remate control.
Move rocker
Up/Down:
G). In non-OSO menu operation, move rocker
Up/Down
to select the channel, the function is
the same with pressing
[CH+]/[CH-]
key on the
remate control.
@. In OSO menu operation, move rocker
Up/Down
to select the adjustment items, the function is
the same with pressing
[..6.]/[T] key on the
remate control.
Note: Different mode/s may have different
appearances; please refer to the actual device.
Remote Control
Method for lnstallation of Remate Control
Battery
Remove the battery compartment cover and insert
two AAA (No. 7, 1.5V) batteries; make sure the polarity
of the batteries is in compliance with the polarity mark
"+" and "-" in the battery compartment of the remate
control.
Precautions for using the remate control
• The remate control should be pointed at the
remate control sensor during operation. An
object placed between the remate control and
the remate control sensor may impede normal
operation.
• The remate control should be prevented from
strenuous vibration. Besides, please do not set
or place the remate control under direct
sunshine, as heating power may result in
deformation of the remate control.
• Remate control failure may occur when the
remate control sensor of the main unit is under
direct sunshine or strong lighting; in this case,
please change the angle of lighting or this TV
set, or operate the remate control near the
remate control sensor.
• Low battery will influence the remate control
distance, in which case, the battery should be
replaced with a new one. lf the remate control is
going to be idle far a long time ar the battery
runs out, please take the battery out to prevent
the remate control from being corroded by
battery leakage which may result in damage and
failure of the remate control.