Basic Operations
Remark:
1. The keys operation refers to remote control
operation, for panel control keys operation
please refer to
"Panel Control Keys"
operation
explanation.
2. Menu Operation lnstruction in this manual is
explained according to TV mode. The operations
in other modes are similar to the one in TV
mode, and users can take it as reference.
3. Before power-on platform, please make sure that
the power supply is stable.
Turning on/Standby
Plug power cord into the electrical socket, then
press
[ól
key to turn on the TV. The screen displays
"Welcome" menu. Then you can set
Language, Net
and
Time
according to your needs. Finally, select
Finish
and press
[OK]
key to close the wizard.
In power on state, press [ó] key to switch to
standby mode.
*
Speeial Tips:
This device adopts energy saving
technology. lf there is no signal input in power on
state, it will enter standby state automatically in five
minutes; The device will enter stand by state
automatically at specified sleep time.
Signal source selection
You can connect various devices to the TV set and
view high quality images. lf the video device has
HDMI, AV and other video output ports. You can select
one of them and connect to corresponding input ports
of the TV set. After connected, turning on the device
and press
[SOURCE]
key, then menu of signal source
will be displayed on the screen. Press the [◄]/ [►] key
to select the input signal, and press
[OK]
key to
confirm .
7
Menu operation description
Press
[MENU]
key to show the main menu on the
screen:
1. Press
[.6.]/[T]
key to select a menu from
¡g¿J (Picture ), e:]>) (Sound), @) {Channel),
®(Setting), B,(Parental Control). Then press [►]
key to enter the selected menu.
2. Press
[.6.]/[T]
key to select an item in the menu.
3. Press
[OK]
key to enter the submenu.
4. Press [
◄]/[►]
key to adjust the val u e or setting.
5. When the main menu shows on the screen,
press
[MENU]
key to exit the main menu; Press
[:)] key to return to previous menu when the TV
display the submenu.
6. During menu operation, the icons of invalid
options will change into grey.
Note:
The default password for the lock system is
0000.
Program scanning
Tune the programs before watching the TV for the
first time. Before scanning, please make sure that the
antenna has been connected properly and select
Antenna Type which want to choose. The following
example channel searching
Antenna Type
is under
DVB-T.
Auto Tuning
Press
[MENU]
key, and select@) >
Auto Tuning,
then press
[OK]
key. Then you can select country
where you are and press
[OK]
key to confirm(you
need to enter the password when several country was
chosen). The machine start auto tuning after selecting
Start Sean.
During auto tuning, you can select
Stop
Sean
to exiting tuning.
DTV Manual Tuning
Press
[MENU]
key, Select@) >
DTV Manual
Tuning,
Press
[OK]
key to enter
DTV Manual Tuning
menu. Press [
◄]/[►]
key to select channel, then press
[T] key to select
Start Sean
and press
[OK]
key to
confirm.
ATV Manual Tuning
Press [MENU] key, Select@) > ATV Manual
Tuning, Press [OK] key to enter ATV Manual Tuning
menu. Press [
◄]/[
►] key to select frequency, then you
can select Sean Up or Sean Down to tune far high
frequency or low frequency. During the tuning, you can
select Stop Sean to exiting tuning.
