Aspes ACT1680, Инструкция по эксплуатации

Страница: 5 / 24

INSTALLATION
As a first step, proceed with the following drawings:
A vertical l ine up to the ceiling or up to the upper limit, at the center of the area in which the hood
is to be fitted.
A horizontal line A at 970 – 1070 mm above the cooker top.
A horizontal line B at a X mm above the horizontal line A .
A horizontal line C at a 2 43 mm below the horizontal line A .
Mark Points:
Mark a point (1) on the horizontal line A , 80 mm to the vertical reference line.
Repeat this operation on the other side and on the vertical reference line, checking that the
three marks are leveled.
Mark a point (2) on the horizontal line B , 60 mm to the vertical reference line.
Repeat this operation on the other side, checking that the two marks are on the same
horizontal line.
Mark a point (3) on the horizontal line C , 100 mm to the vertical reference line . Repeat
this operation on the other side , checking that the two marks are leveled.
Fix the brackets :
Drill holes at the marked points with a ɸ10 mm drill bit.
Insert the Wall Plugs 11 into the holes.
Fix the hood fixing bracket 20 with 3 screws 10 (5 x 50) at the horizontal line A.
Fix a Chimney fixing bracket 21 with 2 screws 10 (5 x 50) at the horizontal line B .













WALL DRILLING AND BRACKET FIXING
100 100
C
(3)
Vertical reference line
243
2 3 4
6 7 8
9 10 11
EN-5
Option Chimney X
1
400X390 160-500
2
500X490 260-700
3 6 00X 5 90 3 60- 9 00