ASPERA R12, Руководство пользователя

Страница: 10 / 21

10
3.2.3 PIN2 CODE
PIN2 code (consists of 4~8 digits) is provided together with SIM card by the
network provider. It’s set for “Call time” and “Call cost” functions. Please check with
the network provider if your SIM card is offered with these functions. If the PIN2
code is input incorrectly 3 times , the SIM card is blocked.
TO UNBLOCK THE SIM CARD:
•
Follow the instructions displayed and input correct PUK2 code.
•
Input a new PIN2 code and confirm.
•
Input again the new PIN2 code and confirm.
NOTE:
PUK2 code (consists of 8 digits) is provided by the network provider. If the
PUK 2 code is input incorrectly 10 times, the functions provided by PIN2 code are
blocked. Please contact the network provider to acquire a new SIM card.
3.2.4 CALL BARRING PASSWORD
The Call barring password is required when using “Call barring”. Please ask your
network provider If you do not know this code.
3.3 CHARGING
The “Battery indicator” icon indicates the battery level. Once the battery level is
low, “Low battery” will pop-up on the screen. To charge your phone connect it to
the power supply by using the original charger and USB cable supplied in the box.
If the phone is left unused for a long time and the battery runs out completely, it
may take a few minutes to power on the phone after the charging starts.
ATTENTION:
Please do check if the power supply meets all specifications of the
charger (check the sticker on the charger for the rated input voltage / current of
the charger ) . It‘s strongly recommended to fully discharge and charge the battery
for the first 3 cycles.
3.4 POWER ON/OFF
In power off mode, long press the “Power on/off” key to power on the phone.
If a password is required when powering on, input the correct phone password.
The default phone password is 0000. If a PIN code is required, please input the
correct PIN code which is provided by network provider. Long press “Power on/off”
key to power off the phone.
3.5 EARPHONE
When the earphone is plugged in, the phone goes into “Earphone Profile”
automatically.
03 PREPARATIONS BEFORE USE: