10-08-2018
Page 2/3
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Side Rail
Slat bearer
STEP 3: Arrange slats on the slat
bearers and then lay the decking on
top of the slats. Make sure the top
and bottom slats are situated
underneath the pre-drilled holes as
shown below in STEP 4. Remove
the decking and attach slats to the
slat bearers with wood screws (F).
STEP 2: Attach the support legs with leveler to the slats.
Adjust the levelers on bottom of support legs when necessary.
Support Leg
Leveler
This End Up
Slat
A
C
B
D
E
Wood Screws (F)
ITEM NO: IML-473-BRN/GRY Queen Platform HB
IML-471-BRN/GRY Queen Platform Rails and Decking
IML-472-BRN/GRY Queen Platform FB
FULL &QUEEN
HOLLYWOOD FRAME
STEP 1: Insert wood dowel(H) at both end of the side rails. Screw the bolts(A) into HB & FB. Align
the bolts with the holes in the end of side rails and attach the side rails to HB & FB using half moon
washers(B), lock washers(C) and nuts (D).Then use a hex wrench(E) to tighten all the nuts.
H
Wood Dowel
