aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/2
ITEM NO: I256-456 Chest
1/4"
Metal Leg
Buckle plate
A
B
C
Metal Leg
D
Screw
Screw
Case
STEP 1: Put the case upside down on a soft surface.
STEP 2: Each metal leg will come with screw pre-installed with a 1/4" lag as shown below. Adjust
as needed to ensure the 1/4"
lag. Insert the screw on each metal leg into the buckle plate on the
case and push it down to the suitable position. Attach the metal legs by using 4 bolts (A), lock
washers (B) and flat washers (C). Use the allen wrench (D) to tighten the four bolts. If the leg is
loose in the buckle plate, the leg should be removed and the screw adjusted as needed. Once legs
are all secure, return the case to the upright position.
STEP 3: Taking out each of the knob by removing the screws when opening the drawers, attach all
knobs to the front of the drawers by screws as shown below.
Knob
Screw
Knob
09-28-2021
