aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/2
Buckle plate
A
B
C
Metal Leg
Metal Leg
D
Screw
Case
Screw
Support Leg
ITEM NO: I256-272 70" Console
Knob
Screw
Knob
STEP 3: Reverse each knob by removing the screws while each drawer/door is open and
attach all knobs to the front of the drawer/doors with screws as shown below.
04-28-2022
1/
8"
STEP 1: Put the case upside down on a soft surface.
STEP 2: Each metal leg will come with screw pre-installed with a 1/8" lag as shown below. Adjust
as needed to ensure the 1/8"
lag. Insert the screw on each metal leg into the buckle plate on the
case and push it down to the suitable position. Attach the metal legs by using 4 bolts (A), lock
washers (B) and flat washers (C). Use the allen wrench (D) to tighten the all bolts. If the leg is
loose in the buckle plate, the leg should be removed and the screw adjusted as needed. Install the
support legs as well. Once legs are all secure, return the case to the upright position.
