aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 3/4
Headboard
H
K
J I
L
STEP 6: Attach the support legs (for slats) with levelers to the slats.
Adjust the levelers on bottom of support legs when necessary.
Support Leg
(for slat)
Leveler
This End Up
Slat
Wood Screws (M)
STEP 7: Arrange slats on the side storage rails and then lay the
decking on top of the slats. Make sure the top and bottom slats are
situated underneath the pre-drilled holes as shown below in STEP 8.
Remove the decking and attach slats to the side storage rails with
wood screws (M).
STEP 5: Screw the bolts(H) into HB & FB. Align the bolts with the holes in the end of side storage
rails and attach the side storage rails to HB & FB using flat washers(J), lock washers(I) and nuts
(K). Ensure the drawers are situated close to the footboard. Then use a hex wrench(L) to tighten all
the nuts.
Adjust the leveler
when necessary
Leveler
ITEM NO: I249-412-TAL Queen Panel HB
I249-402S-TAL Queen Side Storage Rails
I249-413-TAL Queen Panel FB
07-23-2020
