aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/3
ITEM NO: I233-297H 96" Hutch
Bottom End Strip
Side Strip
Central Strip
Side Back Panel
STEP 2: Then insert the central back panel
with the cord hole in the bottom. Attach the
top end strip to whole back panel using 4
bolts(A), lock washers(C) and flat
washers(E). Make sure the back panels'
finished side is facing inward. Completely
tighten all bolts.
A
A
C
C
E
E
Top End Strip
STEP 1: Start with the bottom end strip.
Attach one side strip to bottom end strip using
1 bolt(A), lock washer(C) and flat washer(E).
Do not completely tighten bolts to allow some
leeway for adjustment in STEP 2.
Insert one side back panel into the groove on
the side strip and slide down firmly. Make sure
the bottom of side panel is seated into groove
in the bottom end strip. Repeat the same
procedure for the rest of strip and panel.
Central Back Panel
STEP 3: Attach the left pedestal and right
pedestal to the top assembly using 8 bolts
(B), lock washers (C) and flat washers (D).
Do not tighten bolts until STEP 4.
02-20-2020
B
C
D
