![aspenhome I07-415-WBR Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/aspenhome/i07-415-wbr/i07-415-wbr_assembly-instructions-manual_2984874004.webp)
05-16-2017
Page 4/6
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ITEM NO: I07-415-WBR/PEP/BLK King Panel HB
I07-406-WBR/PEP/BLK King Rails
I07-410-WBR/PEP/BLK Cal King Rails
I07-407-WBR/PEP/BLK King Low Profile FB
I07-404-WBR/PEP/BLK King Sleigh HB
O
P
Q
R
STEP 6: Screw the bolts(N) into HB & FB. Align the bolts with the holes in the end of side rails
and attach the side rails to HB & FB using flat washer(P), lock washers(O) and nuts (Q).Then use
a hex wrench(R) to tighten all the nuts.
Make sure the slat bearer is
in the LOWER position.
N
Headboard
Slat bearer
The outside holes match to 6/6 bed rails,
the inside holes match to 6/0 bed rails.
Side Rail
Side Rail
Side Rail
STEP 7: Attach the support legs with leveler to the
slats. Adjust the levelers on bottom of support legs
when necessary.
Support Leg
Leveler
This End Up
Slat
STEP 8: Arrange the slats on the slat bearer
equally and attach to the slat bearer with
wood screws (M).
Wood Screws (M)
STEP 9: For Cal King bed, insert wood caps(S) into the holes on
headboard and footboard. For regular King bed, skip this step.
Wood Cap