Installation and Startup Guide
Rio Rancho, NM
23
FCC PART 15 COMPLIANCE INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense
FCC PART 68 COMPLIANCE INFORMATION
This equipment complies with Part 68 of the FCC rules. Located on the equipment is a label that contains, among
other information, the ACTA registration number and ringer equivalence number (REN.) If requested, this information
must be provided to the telephone company.
The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive
REN’s on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all
areas, the sum of the REN’s should not exceed five (5.0). To be certain of the number of devices that may be con-
nected to the line, as determined by the total REN’s contact the telephone company to determine the maximum REN
for the calling area.
This equipment cannot be used on the telephone company-provided coin service. Connection to Party Line Service is
subject to State Tariffs.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that tempo-
rary discontinuance of service may be required. If advance notice isn’t practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your right the file a complaint with the FCC if you believe it
is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the
operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to
make the necessary modifications in order to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact:
Lectrosonics, Inc.
581 Laser Rd. Rio Rancho, NM 87124
Tel: 505-892-4501
Fax: 505-892-6243
If the trouble is causing harm to the telephone network, the telephone company may request you to remove the equip-
ment from the network until the problem is resolved.
This equipment uses the following USOC jacks: RJ11C
It is recommended that the customer install an AC surge arrester in the AC outlet to which this device is connected.
This is to avoid damaging the equipment caused by local lightening strikes and other electrical surges.
INDUSTRY CANADA NOTICE
This product meets the applicable Industry Canada technical specifications/Le présent materiel est conforme aux
specifications techniques applicables d’Industrie Canada.
The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a
telephone interface.
The termination on an interface may consist of any combination of devices subject only to the requirement that the
sum of the RENs of all the devices does not exceed five.
L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccor-
dés à une interface téléphonique.
La terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que
la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.”
Содержание SPNTWB
Страница 2: ...SPNTWB LECTROSONICS INC 2...
