Aspar SDM-6TE, Руководство пользователя

Страница: 13 / 17

SDM-6TE
User Manual
8. Modules Registers
8.1. Registered access
Modbus Dec Hex Register Name Access Description
30001 0 0x00 Version/Type Read Version and Type of the device
30002 1 0x01 Switches Read Switches state
40003 2 0x02 Boud rate Read & Write RS485 baud rate
40004 3 0x03 Stop bits Read & Write No of Stop bits
40005 4 0x04 Parity Read & Write Parity bit
40006 5 0x05 Respons Delay Read & Write Response delay in ms
40007 6 0x06 Modbus Mode Read & Write Modbus Mode (ASCII or RTU)
40033 32 0x20 Received packets LSB Read & Write
No of received packets
40034 33 0x21 Received packets MSB Read & Write
40035 34 0x22 Incorrect packets LSB Read & Write
No of received packets with error
40036 35 0x23 Incorrect packets MSB Read & Write
40037 36 0x24 Sent packets LSB Read & Write
No of sent packets
40038 37 0x25 Sent packets MSB Read & Write
30051 50 0x32 Inputs Read
Connected sensors
Bit in high state → sensor is connected
40052 51 0x33 Outputs Read
Alarms state
bit 6 and 7 alarm outputs
30053 52 0x34 Temperature 1 Read
Temperature or measured analog
in mV
・
10 for voltage to 2048mV
in mV
・
100 for voltage to 256mV
in °C
・
10 for temperature
in Ω for resistance
30054 53 0x35 Temperature 2 Read
30055 54 0x36 Temperature 3 Read
30056 55 0x37 Temperature 4 Read
30057 56 0x38 Temperature 5 Read
30058 57 0x39 Temperature 6 Read
30059 58 0x3A Alarm temperature 1 Read Alarm temperature for alarm output 1
30060 59 0x3B Alarm temperature 2 Read Alarm temperature for alarm output 2
30061 60 0x3C Junction temperature Read Module junction temperature
30062 61 0x3D Measurement current Read Measurement current
40063 62 0x3E MAX alarm level 1 Read & Write
If the temperature exceeds this value the
corresponding alarm flag is set
40064 63 0x3F MAX alarm level 2 Read & Write
40065 64 0x40 MAX alarm level 3 Read & Write
40066 65 0x41 MAX alarm level 4 Read & Write
40067 66 0x42 MAX alarm level 5 Read & Write
40068 67 0x43 MAX alarm level 6 Read & Write
40069 68 0x44 MIN alarm level 1 Read & Write If the temperature is below this value
corresponding alarm flag is set
40070 69 0x45 MIN alarm level 2 Read & Write
40071 70 0x46 MIN alarm level 3 Read & Write
Expansion modul – 6 temperature inputs
User Manual Version 1.1 13 z 17