ARB-0612
Tab. 3.1. Description of the communication cable with full confirmation
Connector 1
Connector 2
Function
2
3
Rx ← Tx
3
2
Tx → Rx
4
6
DTR → DSR
5
5
GND
6
4
DSR ← DTR
7
8
RTS → CTS
8
7
CTS ← RTS
4.
Instalation
4.1.
Installation of USB drivers
Before you start the proper operation, you must install the appropriate USB
drivers on the computer with which the converter should work. The type of drivers
depends on the operating system installed on your computer. The drivers and
instructions
for
installing
them
are
available
at:
http://www.ftdichip.com/FTDrivers.htm
Attention!
When installing drivers, please pay attention to their
appropriate selection. There are various drivers for 32-bit
and 64-bit systems.
Advice
.
Some of the latest operating systems do not require
installation of drivers. Before installing the drivers, make
sure that it is necessary.
10/2018
ARB-0612_v1_01
10
