
Zapper Tornado BT™ Users Manual
© 2010-2017 ASP Microcomputers
Page 20
Electromagnetic Interference (EMC)
The
ASP Zapper Tornado BT™
has been tested for compliance with the following
standards:
USA
FCC Part 15, Subpart B, Class A.
Europe
European Standard EN 55022:1994/A1:1995 Class A.
Australia Australian Standard AS3548:1993 (being an equivalent Standard to the
European Standard above).
The RCM (Regulatory Compliance Mark), shown on the right, confirms that
this product meets the requirements of the ACMA and replaces the old
C-Tick logo.
Warranty
To the extent permitted by law, ASP's warranty in respect of
Zapper Tornado BT™
and
its use is limited to correction of defects due to faulty components or workmanship for
a period of two years from the date of purchase. This warranty does not extend to
batteries or cables, and does not cover wear and tear to products.
This warranty is in lieu of other warranties express or implied including but not limited
to the implied warranties of merchantability and fitness for purpose. In no event will
ASP Microcomputers be liable for damages including loss of profits or other
consequential damages arising out of use or inability to use the products.
This limited warranty gives you specific legal rights. Some states give other rights
and/or do not allow excluding or limiting implied warranties or limiting liability for
consequential damages. Accordingly, the above limitations/exclusions may not apply
to you. If any provision of this agreement shall be void unlawful or unenforceable then
that provision shall be severable without affecting the validity of remaining provisions.
This agreement is governed by the law of Victoria, Australia.
It is your responsibility to carefully pack any unit being returned for service, warranty
or otherwise, and pay shipping charges to your dealer location or ASP. Units sent
freight collect will not be accepted. Freight back to you will be paid by ASP in the case
of warranty repairs.
If you require support for an ASP product, please visit our web site at