Asoni SVR440, Руководство пользователя

Страница: 33 / 48

32
Motion Detection
This device supports 1 motion detection area on each channel. When motion is
triggered, it can send the video to specific mail address, transmit the video to remote
FTP server, trigger the relay, and save video to local SD card.
Set the Area: To set up the motion area, click on buttons to
select the channel, use mouse to drag the area on the video. To adjust the sensitivity
of detection, select the level from the pull-down list. Click [Setting] when you finish
the area setting, and then set up another channel if necessary. To remove the motion
detection area, click [Clear] button.
Activate Motion Detection: To activate the motion detection, enable the [Detect
CHn] check box, and then select the actions when the motion is triggered.
Subject: The subject of the E-mail.
Interval: The interval time between multiple detections. For example, if the time set to
10 seconds, when the motion detection is triggered at time 10H:05M:10S, the next
detection will be accepted after 10H:05M:20S. The detections between 10H:05M:10S
to 10H:05M:19S will not be accepted.
Note: Limited by the built-in RAM of this device, when data is too much or video
quality set too high, it will cause recording frame drop or decrease the recording
time of post alarm.
To avoid the “frame drop” situation, please reduce the bitrate of the video. We
recommend connect the device in LAN (Local Network) and set the video as
CBR, and Bitrate less than 1.5Mbps.
Recommendation of Motion Detection Area
To ensure the Motion Detection works well, and avoid unnecessary trigger, please
follow the rules to draw the Motion Detection Areas:

The moving object larger than the 50% of the Motion Detection Area, it will be
detected, and the Motion Detection is triggered.

The moving object smaller than the 50% of the Motion Detection Area, it will not
be detected, and the Motion Detection will not be triggered.