30
5.3.2 Network (Advanced)
NTP Configuration
Use the following NTP server address:
Enter the host name or IP address of the
NTP server.
Note: For users using PPPoE as their network access, any change made to the
“Network address” of the “NTP Configuration” may cause the screen to remain
still for a while, because your local ISP (Internet Service Provider) is assigning
new IP address and new values for the HTTP, RTSP and FTP ports, whenever a
change is made to NTP through PPPoE.
Enable HTTP
The default HTTP port number 80 can be changed according to the user’s need. This
is useful for simple security port mapping.
Enable RTSP
The RTSP protocol allows a connecting client to start an H.264/MJPEG stream. The
default setting is 554.
Enable FTP
The FTP server running in the network cameras enables the upload of new firmware,
Содержание CAM743F
Страница 11: ...10 3 2 Monitor Setting 1 Right Click on the desktop Select Properties 2 Change color quality to Highest 32bit...
Страница 15: ...14 1 2 3 4 5 When popup the following dialogue box click Yes...
Страница 42: ...41 SMTP Server HTTP Server...
Страница 43: ...42 TCP Server After set up click Save to save the settings...
